Hi guys! Now, I'm no good at drawing characters, but I found that I can make a decent weapon..... Any requests? Any? BTW, I'll be doing some of this for an upcoming RP... This is kind of a warm up. :)
REQUEST AWAY! (But it WILL take time)
Could you make Dranfor Rofnard's battle axe?
You knew you had this coming, dann...
Martin the Warrior's Sword.
Please. *puppy eyes*
Quote from: Redwaller on November 20, 2012, 03:03:41 AM
Could you make Dranfor Rofnard's battle axe?
Could you please describe it? :) Once you have the details up, I'll look into it.
Quote from: WarriorOfMossflower on November 20, 2012, 03:40:42 AM
You knew you had this coming, dann...
Martin the Warrior's Sword.
Please. *puppy eyes*
Hmmmm..... I'll consider it. ;)
But right now, it's quite late, and my mom is threatening.... to do something that I'm not sure quite what if I don't giver her a Christmas list.... Black Friday and all..... lol.
Double scimitars with black leather grip, silver crossguard and pommel, unadorned.
bow and arrows in quiver
sling with stone roling out of a stone pouch.
Could you make a GOUSIM rapier. However you like. :D
Rofnard's axe is like this:
It is quite big, it has a red cordelet tied around the handle. There's a small chip missing from the blade, and the wood of the handle is white.
Quote from: Redwaller on November 20, 2012, 11:14:51 PM
Rofnard's axe is like this:
It is quite big, it has a red cordelet tied around the handle. There's a small chip missing from the blade, and the wood of the handle is white.
This will be my first project. :)
And Warrior....... You'll love Martin's sword if/and when I do it ;) It's not going to be just a drawing.
I'm sure I will, dann. I'm sure it'll be epic.
Hey Redwaller! Yours is done, though I'm going to admit now, it wasn't good at all.... Sorry.
(http://i45.tinypic.com/351irv4.png)
@everyone: From now on please describe IN DETAIL what your request is.
OKay I'll try one if you have the time Dann.
The weapon is a sword. Rapier length and deadly sharp on both sides. It's metal shines in the sun. The middle of the blade looks like it could have writing on it but it doesn't. In the place of writing it's goldish with some incricate swirly designs on it. The hilt of the sword is woven from some reed material and is red. At the end is a blue jem.
Quote from: danflorreguba on November 25, 2012, 08:14:16 PM
Hey Redwaller! Yours is done, though I'm going to admit now, it wasn't good at all.... Sorry.
(http://i45.tinypic.com/351irv4.png)
@everyone: From now on please describe IN DETAIL what your request is.
Awesome!!!
Quote from: Redwaller on November 25, 2012, 09:13:26 PM
Quote from: danflorreguba on November 25, 2012, 08:14:16 PM
Hey Redwaller! Yours is done, though I'm going to admit now, it wasn't good at all.... Sorry.
(http://i45.tinypic.com/351irv4.png)
@everyone: From now on please describe IN DETAIL what your request is.
Awesome!!!
Err... You're welcome? :D I didn't think it went very well, but if you like it, then that's all I can ask for. :) Thanks. And Redwallgurl, I'll look into that one, might be able to build that one off of soli......
Thanks! :)
It's appropriate for christmas! :D
Quote from: Redwaller on November 25, 2012, 10:24:19 PM
It's appropriate for christmas! :D
LOL! I couldn't help but compare it to a candy cane myself! :D
Great news everybody! I FINALLY got Solidworks functioning on my CP and will be able to do some three dimensionals! Redwallgurl's will be the first to go, and Warrior of Mossflower, if I'm going to do Martin's sword, then I'm going to wait for my Solid Works skills to improve. ;)
(http://i50.tinypic.com/4i5o3.png)
Hey guys! This is the updated version of Rofnard's Axe!
P.S. Just for those who are newer. This double-post IS okay since it is an update on previous things I've worked on.
BTW, if you ever want the picture for posting reasons, just give mea holler via PM, and I'll get it to you ASAP.
Nice I like it, it looks like real metal.
Looks great!!!:)
nice i can do bucklers and most swords pretty well
Awesome.
Quote from: redwallgurl on November 25, 2012, 08:49:49 PM
OKay I'll try one if you have the time Dann.
The weapon is a sword. Rapier length and deadly sharp on both sides. It's metal shines in the sun. The middle of the blade looks like it could have writing on it but it doesn't. In the place of writing it's goldish with some incricate swirly designs on it. The hilt of the sword is woven from some reed material and is red. At the end is a blue jem.
What's up guys! I know it has been awhile since I've done anything in here. I haven't started the sword yet (still planning how I'm going to do it, and I need to find out how to apply properties to my creations), but I DO plan on reving up the Solidworks program on my computer and have a serious talk with it about really hard to build swords. :D (as a help to me, If you guys just happen to think about it, please PM me a reminder, especially on Saturdays.)
Is there still interest in this? ??? I was going to upload an update pic of the sword blade (once I figure out how), but no one has said anything...
Quote from: danflorreguba on January 24, 2013, 03:34:48 PM
Is there still interest in this? ??? I was going to upload an update pic of the sword blade (once I figure out how), but no one has said anything...
Yep, we are all waiting pal.
I can't wait!
Okay then. :) I'll see if I can figure out how to show you guys how it's coming along.
Whew, been a LONG time since I've posted here. Anyway, I'm hoping to be able to get back to this soon, with Black Friday coming up AGAIN I plan on obtaining a computer fully capable of handling the software. Not only that, but I'm almost a certified Solid modeler now as well.
So do you like Solidworks? I tried it once, but I prefer Blender
Never used Blender, but yes, I very much like Solidworks. :)
I do not if it has many details, but do you remember that WARRIOR BESERKER mole from the sable queen? He is my second fav character. Could you maybe do his war hammer? I don't know where to find it :(
Axtel Sturnclaw?
Ahhhh.. Axtel's hammer eh? :) Sounds like a great firstie, Hammer's will be nice because they have nice blocky geometry to work with, It'll take awhile, but with some nagging I should have you a hammer. ;)
Question, since you were the one to ask for his hammer, tell me what materials you want the handle and head to be made out of, if you want the designs I'm going to try and place on the primary head to be a different material as well I can do that, it'll take longer but I can do that. :)
For example: Oak handle, stone base hammer, iron design/casing
That's just an example, heck you could ask me to make it out of water! :D
I know nothin about his hammer, lol. Maybe a stone head, I think, and an oak handle?
Do the Coin now
Quote from: Vilu Daskar on December 03, 2013, 01:56:13 AM
Do the Coin now
What coin? You're going to have to be more specific.
Hey, heeeey, HEEEEY! It's DOOOOOOOOOOOOONE! And here's Axtel's hammer dear sir. :)
(http://i39.tinypic.com/1zn4ahl.jpg)
What do you think?
Info- Head was made from pure lead as there were no rock options in SW and and Lead seemed the closest appearing material. Design was a type of Iron, Ductile I think, again for the color. Handle waaaaaass... Mahogany, once again for the appearance. Requests anyone? :) (Redwallgurl, you've got preference)
Nice! Could you do a sling?
Very cool! I was wondering if you could (at some point in the future) draw a sword for me? Specifically a sword called
Frostbyte.
Hilt: A silver knuckle guard, making it a one-handed sword.
Knuckle guard
(http://3.bp.blogspot.com/-Gr7J4mMzezY/TgDgiSegpSI/AAAAAAAACI0/ntKDS86o3qU/s1600/WeaponCollector+trench+sword+knuckle+duster+brass+knuckles+knife+WW1+WW2+cutlass+guard+homemade+%252811%2529.JPG)
Blade: The blade is that of the mythical harpe, meaning that it curves slightly, but is still a double-edged blade. It's white/silver, and has the name
Frostbyte engraved near the hilt.
Harpe blade
(http://i235.photobucket.com/albums/ee10/Duok/Weapons/Swords/falchion.jpg)
Awesome!
Sadly, I don't think a sling would work for me at the moment, construction for a weapon like that is really awkward. :(
Rainshadow, I currently have no other commissions, so yours will be on the table with first priority currently, but if someone comes with a request from the Defiance RP then that will instantly take preference.
I'm from the Defiance rp, could you maybe draw a dirk for my character that loos like this?
http://www.medievalcollectibles.com/p-9873-scottish-regimental-dirk.aspx
Quote from: danflorreguba on December 05, 2013, 04:25:31 AM
Hey, heeeey, HEEEEY! It's DOOOOOOOOOOOOONE! And here's Axtel's hammer dear sir. :)
(http://i39.tinypic.com/1zn4ahl.jpg)
What do you think?
Info- Head was made from pure lead as there were no rock options in SW and and Lead seemed the closest appearing material. Design was a type of Iron, Ductile I think, again for the color. Handle waaaaaass... Mahogany, once again for the appearance. Requests anyone? :) (Redwallgurl, you've got preference)
Sorry missed this. It's AWESOME I can't even tell if it's a drawing or not. Is it?
Quote from: danflorreguba on December 08, 2013, 06:58:27 PM
Rainshadow, I currently have no other commissions, so yours will be on the table with first priority currently, but if someone comes with a request from the Defiance RP then that will instantly take preference.
Totally fine. I'm in no hurry. I just wanted to see what a specific sword would look like for a character of mine, and since you make quite awesome weapons, I took it to you. So no worries if it takes you five billion years to finish or anything. :P
Quote from: Shadefur nightblade on December 08, 2013, 07:46:04 PM
I'm from the Defiance rp, could you maybe draw a dirk for my character that loos like this?
http://www.medievalcollectibles.com/p-9873-scottish-regimental-dirk.aspx
Oh my... :D Come back to me if you get one in the RP, this preference only comes if your character has it. As of now, it's second on my commissions list. If your character picks one up later though, then it will jump the list to the bottom of RP commissions. ;)
Thanks Rainshadow. :D and be sure to tell me if YOUR character picks one of these up. ;)
Thanks blaggut, and it's multiple drawings extruded to one point or other, I can go grab the individual renders if you want to see, I could also deconstruct the assembly to show you how they all went into the finished product. :)
More to mention, if you ever want a pic to use for yourself, just click on the quote button, and take the link inside the image code bars ( [img] [/ img] ).
Also, Rainshadow, do you want the spikes on the knuckle guard? Or just hte guard itself?
Just the guard. It doesn't really need spikes. ;)
Oh, another thing, what materials do you want it made of and where?
Quote from: danflorreguba on December 09, 2013, 04:16:13 PM
Oh, another thing, what materials do you want it made of and where?
Ummmm.... Not sure. The blade made of a metal that's silvery or white, and the hilt out of dark grey metal.
Update: Rainshadow, the blade is done, but pure silver is surprisingly dark, do you want the color specifically silvery white?
Quote from: danflorreguba on December 12, 2013, 02:28:56 AM
Update: Rainshadow, the blade is done, but pure silver is surprisingly dark, do you want the color specifically silvery white?
If possible, yes, but if not, you can just keep it silver. :)
*sigh* I tried every trick I could think of to get the knuckle guard to work, but Solidworks being stupid. :-\ Here's the final product as incomplete as it is.
(http://i42.tinypic.com/244tyf8.png)
Awesome! Thanks! :D
Cool!
REQUEST!!!!!! Could you make a battle axe, the blade dark grey, the shaft wooded, (any woody colour) the handle green, and blue. ;D
Are you capable of making things look as if they're made of Damascus steel?
That would be difficult. Might want to look it up, Dan, if you are planning on drawing something like that.
FYI, my Solidworks launcher is being a jerk and claiming that it expired. ::) Because it's obviously December of 2014, geez. I'm trying to fix this problem currently.
I've got one! A one sided blade, short but not wide. It's hilt is a flat oval. It's pommel is the head of a mouse. It's handle is black stained leather. The blade has runes carved into it.
Can you draw yourself with a weapon? What is your favorite weapon? Whatever it is, draw yourself with it. ;)
Woah :o that's really good!
Weapon art?!?!?!
THIS IS MY KIND OF TOPIC 8)
@danflorreguba I can't see any of them, did you delete them?
The host site died, and now there aren't any free image hosting sites that I'm aware of (not sure if I still have any of those pics either).
aaaah, so that's why I can't see so many people's art...also, ibb
I use postimage, and they seem to be free, and most people can see my pictures as far as I'm aware.
You could also upload them to Google images if you have a Google account, but then people can use the image address to see your email and stuff. . .
I use ibb it's free..